BPIC16C8.TXT

Beschreibung zum CALM-Assembler fr PIC16C71/84
-----------------------------------------------
Gewhlte Adressierung
   Bei Sprungbefehlen (JUMP, CALL) ist nur die absolute Adressierung mglich.

Automatische Optimisierung des Befehlscodes
   Es sind keine Codeoptimisierungen mglich.

Bemerkungen
   Der Assembler erzeugt 16-Bit Code obwohl die tatschliche Befehlscodelnge
14 Bit betrgt.
   Pseudobefehle mit .8 sind nicht erlaubt.
   Erzeugt speziellen Code fr MOVE.8 W,OPTION/TRISi falls .PROCSET OPTTRIS.
Das heisst, das RP0 nicht bentigt wird.
   Mglichkeiten von .PROCSET: OPTTRIS, NOOPTTRIS, C71, C84, DATASIZE,
NODATASIZE, MACINSTR, NOMACINSTR (siehe TPIC16C8.ASM). Vorgabe: C84, OPTTRIS,
DATASIZE, MACINSTR.
   Liste aller Befehle: assemblieren Sie TPIC16C8.ASM mit ASCALM TPIC16C8/L und
drucken Sie die Datei TPIC16C8.LST aus.

Unterschiede zum Herstellerassembler
   Die unterschiedlichen Bezeichnungen der Operationscodes sind in der CALM-
Befehlsliste und der Datei CPIC16C8.TXT angegeben.


Description du PIC16C71/84 pour l'assembleur CALM
-------------------------------------------------
Adressage choisi
   Pour les instructions de sauts (JUMP, CALL), seulement l'adressage absolu
n'est possible.

Optimisation automatique du code machine
   Aucune optimisation n'est possible.

Remarques
   L'assembleur gnre des codes 16-bit. Mais la longueur effective d'une
instruction est 14 bits.
   Les pseudo-instructions avec .8 ne sont pas permises.
   Un code spcial est gnr pour MOVE.8 W,OPTION/TRISi si .PROCSET OPTTRIS.
C'est  dire que RP0 n'est pas ncessaire.
   Possibilits de .PROCSET: OPTTRIS, NOOPTTRIS, C71, C84, DATASIZE,
NODATASIZE, MACINSTR, NOMACINSTR (voir TPIC16C8.ASM). Par dfaut: C84, OPTTRIS,
DATASIZE, MACINSTR.
   Liste de toutes les instructions: assemblez le fichier TPIC16C8.ASM avec
ASCALM TPIC16C8/L et imprimez le fichier TPIC16C8.LST.

Diffrences par rapport  l'assembleur du fabricant
   Les diffrents noms des codes opratoires sont indiqus dans la carte de
rfrence CALM et le fichier CPIC16C8.TXT.


CALM assembler description for the PIC16C71/84
----------------------------------------------
Chosen addressing mode
   Only the absolute addressing mode is possible for the jump instructions
(JUMP, CALL).

Automatic optimisation of the instruction codes
   Code optimisation isn't possible.

Remarks
   The assembler generates 16-bit codes even the real instruction length is
14 bits.
   The pseudo-instructions with .8 are not allowed.
   A special code is generated for MOVE.8 W,OPTION/TRISi if .PROCSET OPTTRIS.
That is, RP0 is not needed.
   Possibilities of .PROCSET: OPTTRIS, NOOPTTRIS, C71, C84, DATASIZE,
NODATASIZE, MACINSTR, NOMACINSTR (refer to TPIC16C8.ASM). Per default: C84,
OPTTRIS, DATASIZE, MACINSTR.
   List of all instructions: assemble the file TPIC16C8.ASM with ASCALM
TPIC16C8/L and print the file TPIC16C8.LST.

Differences to the producer assembler
   The different notations of the operation codes are given in the CALM
reference card and the file CPIC16C8.TXT.
